Critical Issues in Transportation: Addressing Unprecedented Challenges and Opportunities
Given by Neil Pedersen, Executive Director, Transportation Research Board
Enhancing Bridge Safety Inspections with UAS
Given by Jennifer Wells, P.E., State Bridge Inspector, Minnesota Department of Transportation
The Practical Application of Using UAVs for Bridge Inspections
Given by Bob Blunt, P.E., Senior Project Manager, VHB
Integrating Innovation in Bridge Inspections with Unmanned Aircraft Systems (UAS) and Advanced Analytics
Given by Paul Wheeler, P.E. Director of Aerial Innovation, Research & Innovation Solutions, WSP
Portable Synthetic Aperture Radar Imaging Sensor for UAV Bridge Inspections
Given by Dr. Tzuyang Yu, Associate Chair for Doctoral Studies, Professor, Civil and Environmental Engineering, University of Massachusetts Lowell
FRP Composites in Maine Infrastructure
Given by Wayne Frankhauser, P.E., Bridge Program Manager, Maine Department of Transportation
Evolution of Adopting FRP Structural Composites into Practice
Given by Steve Nolan, P.E., Senior Structures Design Engineer, Florida Department of Transportation
FRP Girder Design, Manufacturing, and Utilization Considerations
Given by Ken Sweeney, P.E., President & Chief Engineer, AIT Bridges
Development and Implementation of a Novel Composite Bridge Girder
Given by Bill Davids, Ph.D., P.E., Professor, Civil & Environmental Engineering, University of Maine
Development and Testing of High / Ultra-High Early Strength Concrete for Durable Bridge Components and Connections
Given by Kay Wille, Ph.D., Associate Professor, University of Connecticut
Advancement of FRP Composites in Transportation Infrastructure
Given by John P. Busel, F.ACI, HoF.ACMA, VP, Composites Growth Initiative, American Composites Manufacturers Association
A New ASCE Standard for LRFD Design of Pultruded Fiber Reinforced Polymer Structures
Given by Dr. Mehdi Zarghamee, Senior Principal, Simpson Gumpertz & Heger
Advancing Sustainability in Concrete Infrastructure
Given by Dr. Kimberly Kurtis, Professor and Associate Dean of Engineering, Georgia Institute of Technology
ReversaTM Mineral Carbonation Process for Scalable Production of Low-Carbon Concrete Products
Given by Iman Mehdipour, VP Technology & Engineering, Carbon Built
Low-Carbon Future of Concrete: Inspired by Ancient Roman Technology
Given by Warda Ashraf, Ph.D., P.E., Assistant Professor, University of Texas Arlington
Potential Contribution of the US Pavement Network to the Nationwide Greenhouse Gas Emissions
Given by Hessam Azarijafari, Postdoctoral Researcher, Concrete Sustainability Hub, MIT
CO2 Utilization to Improve Ready-Mixed Concrete Sustainability
Given by Sean Monkman, Ph.D., Senior VP, Technology Development, CarbonCure Technologies
Collaborative Research on Novel Vane Device Used to Improve Helical Pile Performance for Transportation Structures
Given by Aaron Bradshaw, Ph.D., P.E., Associate Professor, Civil & Environmental Engineering, University of Rhode Island
Dynamic Characteristics and Response of More than Century Old Steel Truss Railroad Bridge Structures under Service Load Conditions
Given by Ramesh Malla, Ph.D., F.ASCE, F. EMI, Professor, Civil and Environmental Engineering, University of Connecticut
Engineered Cementitious Materials for Durable Railroad Crossties
Given by Dr. Chang Hoon Lee, Assistant Professor, College of Engineering, Western New England University
Distributed Sensing Textile for Bridge Monitoring
Given by Dr. Xingwei Wang, Professor, Electrical & Computer Engineering & Dr. Tzuyang Yu, Associate Chair for Doctoral Studies, Professor, Civil and Environmental Engineering, University of Massachusetts Lowell
Two-Dimensional Model Development and Flood Analysis Across Multiple Bridge-Stream Networks
Given by Rachel Seigel, Agricultural Engineer, Vermont Agency of Agriculture & Food Markets and US Dept. of Agriculture & Dr. Mandar Dewoolkar, Chair & Professor, University of Vermont